Some companies offer conversion kits that work well, but often require expensive custom rotors, along with calipers and pads available only through mail order or special sources.  Scarebird Classic Brakes LLC offers quality conversion brackets that require no spindle modifications, and use quality, inexpensive off-the-shelf parts available from your local NAPA or Autozone - and thru discount internet suppliers such as RockAuto.com.  The typical 2 wheel conversion costs are $350 to $400 depending on your application.  We also can sell wheel kits, and in some case complete kits.

We now have a new Mopar setup; this uses 1977 Cordoba 11-3/4" rotors and 79-90 Electra calipers.   We were having issues with the Cordoba calipers hitting the lower shock mount on some B bodys. We use a Boeing quality 4140 steel spacer to make this possible.  We sell the brackets and spacers for $130 including shipping to US...

Our new Mopar rear setup as seen in a recent issue of Mopar Performance.  The article had a few errors-
1. The rotor fit just fine, the axle shaft flange may need to be trimmed down to fit inside the rotor.
2.  The rotor is 1 inch thick, and is vented.  Our brackets cost just $130 including shipping to US

All our products are computer engineered, test fitted and manufactured using precision laser cutting and MIG welded here in the USA.  If you have an application that is not currently addressed, and have a spindle /drum hub to loan, contact us for further info.

We accept both VISA and MasterCharge by phone 9-5pm Pacific Mon-Sat, and PayPal using our biznz5qa@verizon.net address 24/7.